Nagios : Add Monitoring Target Host#3
Nagios : Add Monitoring Target Host#3
2015/06/18
|
It's possible to monitor Windows servers on the network.
For example, add Windows Server 2012 R2 for monitoring target.
| |
| [1] |
Download "NSClient++" and upload it on target Windows server.
⇒ http://sourceforge.net/projects/nscplus/ |
| [2] | Install "NSClient++". Input Nagios server's hostname or IP address and set any password during installation like follows. The password is used for the connection from Nagios server to Windows server for monitoring. |
 |
| After installing, NSClient++ has been started. It's not need to change windows firewall settings because installer has done it. |
 |
| [3] | Configure Nagios server. |
[root@dlp ~]#
vi /etc/nagios/objects/commands.cfg
# line 210 : add the password you set on Windows
command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -v $ARG1$ $ARG2$
-s password
[root@dlp ~]#
vi /etc/nagios/servers/windows.cfg
# create new
# define target hosts
define host{
use windows-server
host_name fd3s
alias fd3s
address 10.0.0.100
}
define hostgroup{
hostgroup_name windows-servers
alias Windows Servers
}
# for ping
define service{
use generic-service
host_name fd3s
service_description PING
check_command check_ping!100.0,20%!500.0,60%
}
# for NSClient++ version
define service{
use generic-service
host_name fd3s
service_description NSClient++ Version
check_command check_nt!CLIENTVERSION
}
# for uptime
define service{
use generic-service
host_name fd3s
service_description Uptime
check_command check_nt!UPTIME
}
# for CPU load
define service{
use generic-service
host_name fd3s
service_description CPU Load
check_command check_nt!CPULOAD!-l 5,80,90
}
# for memory usage
define service{
use generic-service
host_name fd3s
service_description Memory Usage
check_command check_nt!MEMUSE!-w 80 -c 90
}
# for disk space
define service{
use generic-service
host_name fd3s
service_description C:\ Drive Space
check_command check_nt!USEDDISKSPACE!-l c -w 80 -c 90
}
# for explorer
define service{
use generic-service
host_name fd3s
service_description Explorer
check_command check_nt!PROCSTATE!-d SHOWALL -l Explorer.exe
}
# IIS
define service{
use generic-service
host_name winserver
service_description W3SVC
check_command check_nt!SERVICESTATE!-d SHOWALL -l W3SVC
}
systemctl restart nagios
|
| [4] | It's possible to view the status for a new server on the admin site. |
 |
Comentários
Postar um comentário